FRAME gel - universal gel for extensions in 13 shades.
Packed in a jar with a pump for dosing the gel.
Color: Warm pale pink.
Characteristics:
• for modeling, correction, strengthening, extensions without sawdust;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer - elastic, and in a thick one it holds the arch and does not deform;
• creates a strong coating that is resistant to chips;
How to use:
• Sand the plate with a 180 grit nail file or a 100 grit buff.
• Wipe with a degreaser to remove dust, especially under the cuticle and in the lateral sinuses.
• Apply a dehydrator and wait 30 seconds for it to evaporate moisture.
• Apply a primer layer of Rubber base with rubbing movements and add a little more base to create a smooth surface. Dry for 30 seconds.
• Press the pump and squeeze out the required amount of material.
• Apply Frame gel with an architectural layer or place in the upper mold or on the lower mold (depending on the technique)
• Polymerize each nail for 30 seconds, then finally put both hands again for 1-2 minutes.
• Remove the sticky layer from the Frame gel and perform surface filing if necessary.
• Apply No Sticky or Dark Story top and dry for 1-2 minutes.
Consistency: medium
Attention! To avoid unnecessary polymerization of the material during operation, testing or removing the contents of the open bottle or penzlik, you need to trim it as a day light (especially in the case of direct sun changes). We also ask you to respect that when the weather is gloomy and gloomy, a large amount of ultraviolet radiation is passed through, which is sufficient for the material to begin to polymerize.
